Yamaha EZ-AG Owner's Manual - Page 23
Turning Local Control On or Off, Setting the MIDI Clock, Set local control as required.
View all Yamaha EZ-AG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Connecting To MIDI Devices Turning Local Control On or Off Local Control determines whether the EZ-AG plays its own internal tone generator (Local Control = ON), or whether performance data is transmitted via the MIDI OUT connector only, without playing the internal tone generator (Local Control = OFF). G Local Control ON This is the normal setting. In this state the EZ-AG's internal tone generator will play whatever is played on the strings and frets, as well as any MIDI data received via the MIDI IN connector. G Local Control OFF In this state the internal tone generator will not sound in response to playing the strings and frets, but the performance data will be transmitted via the MIDI OUT connector. The internal tone generator will play any MIDI data received via the MIDI IN connector. 1 Simultaneously press the [CAPO] and [TUNING] buttons. 2 Set local control as required. Use the [+] and [-] buttons to turn local control on or off as required. [+] turns local control on, while [-] turns it off. • Local control is always ON when the EZ-AG power is initially turned on. Setting the MIDI Clock Normally EZ-AG song playback is synchronized to its own internal clock. Use this function when you want to synchronize EZ-AG playback to a MIDI clock signal from an external device. G Internal Clock (Int) This is the normal setting: EZ-AG song playback is synchronized to its own internal clock. G External Clock (Etr) The EZ-AG will be synchronized to a MIDI clock signal from a connected external device. Song and demo playback will not start if an appropriate external clock signal is not being received. 1 Simultaneously press the [TEMPO] and [VOLUME] buttons. 2 Set the clock as required. Use the [+] and [-] buttons to set the clock mode as required. [+] selects "Int", while [-] selects "Etr". • The clock is always set to "Int" when the EZ-AG power is initially turned on. 21 EZ-AG 23