Yamaha FSW050 Owner's Manual - Page 9

English Using the subwoofer YST-FSW150 front panel POWER VOLUME OFF/SYSTEM ON 0 10 12 POWER 3 VOLUME YST-FSW050 front panel OFF/SYSTEM ON 0 10 POWER VOLUME OFF/SYSTEM ON 0 10 YST-FSW150 rear panel INPUT SYSTEM CONNECTOR 5 INPUT 4 SYSTEM CONNECTOR YST-FSW050 rear panel SYSTEM INPUT CONNECTOR 1 Power indicator Lights up green while the unit is turned on. 2 POWER button Press this button to the ON position to turn on the power of the subwoofer. Press this button to the OFF/SYSTEM position to turn off the power of the subwoofer or to use the system connection (see page 4). 3 VOLUME control Adjusts the volume level. Turn the control clockwise to increase the volume, and counterclockwise to decrease the volume. 4 SYSTEM CONNECTOR terminal Used for system connection. See "The system connection" on page 4 for details. 5 INPUT terminal Input terminal for line level signals from the amplifier. Pre-adjusting the subwoofer volume Before you use the subwoofer, first adjust the volume balance between the subwoofer and the front speakers according to the procedure below. 1. Set the VOLUME control to minimum (0). 2. Turn on the power of all the other components. 3. Press the POWER button to the ON position. Turn on the power switch of the connected component when the subwoofer is connected using the system connection. 4. Play a source that contains low-frequency sounds. Adjust the amplifier's volume control to the desired level. 5. Increase the volume gradually to adjust the volume balance between the subwoofer and the front speakers. To enjoy natural bass sound, keep the subwoofer volume at a level where it is barely distinguishable from other speakers. 6. Adjust the volume of the entire sound system using the amplifier's volume control. y Tip It is recommended to set the VOLUME control about in the middle position when using in a multi channel home theater system. VOLUME 0 10 5 En