Yamaha GX-700 Owner's Manual - Page 17
Connections, Connecting speakers - owner s manual
View all Yamaha GX-700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
English Preparations and connections Connections Never plug the AC supply lead of this system into the AC outlet until all connections are completed. Subwoofer system (Separate purchase) Rear speaker R Center speaker Rear speaker L INPUT Front speakers L R SUBWOOFER OUT R L VIDEO SIGNAL MONITOR OUT SPEAKERS SEE OWNER'S MANUAL FOR CONNECTION. REAR R CENTER L REAR OUT VCR IN CENTER: 6 Ω MIN./SPEAKER REAR: I2 Ω MIN./SPEAKER VIDEO OUT AUX/MD IN R FRONT L (U.S.A model) MAINS 6 Ω MIN./SPEAKER SPEAKERS Ⅵ Connecting speakers To AC outlet Connect the speakers to the corresponding speaker terminals on the rear of the main unit respectively by using the speaker cords. Make sure that the polarity of the speaker cords is correct, that is the + and - markings are observed. If these cords are reversed, the sound will be unnatural and lack bass. On the speakers Red: positive (+) Black: negative (-) 2 13 1 Press the tab 2 Insert the bare wire. [Remove approx. 5mm (1/4") insulation from the speaker wires.] 3 Release the tab and secure the wire. On the main unit Red: positive (+) Black: negative (-) 1 3 2 1 Press up the tab. 2 Insert the bare wire. [Remove approx. 5mm (1/4") insulation from the speaker wires.] 3 Press down the tab and secure the wire. Caution Do not let the bare speaker wires touch each other as this could damage the amplifier and/or speakers. When connecting a subwoofer (separate purchase) You may wish to add a subwoofer to reinforce the bass frequencies. When connecting a subwoofer to this system, connect the SUBWOOFER OUT terminal of this system to the INPUT terminal of the subwoofer. * Ordinary subwoofers, including the Yamaha Active Servo Processing Subwoofer System, are designed so that the amplifier and subwoofer are in the same unit. * The SUBWOOFER OUT terminal outputs low frequencies from the left front, center and right front channels. (The cut-off frequency of this terminal is 200 Hz.) E-7