Yamaha GX-700VCD Owner's Manual - Page 16
Connecting external components, Antenna connection, Supplied FM antenna, Using an external antenna
View all Yamaha GX-700VCD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Preparations and connections (1) ANTENNA FM GND AM 75Ω UNBAL. (2) ANTENNA FM GND AM 75Ω UNBAL. DIGITAL OUT OPTICAL (Singapore model) Ⅵ Antenna connection (1) Supplied FM antenna Connect the FM antenna wire to the corresponding terminal and direct the FM antenna wire to the direction where the strongest signal can be received. (2) Supplied AM loop antenna Connect the AM loop antenna wires to the corresponding terminals. Position the AM loop antenna for optimum reception. Notes ● When static is still heard even after adjusting the position of the AM loop antenna, try reversing the wire connections (from the right terminal to the left one, and vice versa). ● The AM loop antenna should be placed apart from the main unit. The antenna may be hung on a wall. Using an external antenna ● Use an external FM antenna instead of an indoor FM antenna if you need better reception. Consult your dealer. ● Use an external AM antenna if you need better reception. Consult your dealer. ANTENNA FM GND AM 75Ω UNBAL. TV monitor VCR LD/DVD player, etc. MD recorder, etc. E-8 DIGITAL OUT OPTICAL TV MODE PAL AUTO NTSC SUBWOOFER OUT R L VIDEO SIGNAL MONITOR OUT SPEAKERS SEE OWNER'S M FOR CONNECTIO REAR R CENTER OUT VCR IN CENTER: 6 Ω MIN./S REAR: I2 Ω MIN./S VIDEO OUT AUX/MD IN R FRONT L (Singapore model) Ⅵ Connecting external components TV monitor Connect a TV monitor to enjoy playing Video CDs on the builtin CD/Video CD player. Connect a TV monitor to the MONITOR OUT terminal using an RCA pin plug cable. External audio and video components This system can be connected with external audio and video components. Make connections between this system and the components using RCA pin plug connector cables correctly, that is to say L (left) to L and R (right) to R. Also, refer to the owner's manual for the component to be connected to this system. * A digital-to-digital recording is possible from a CD played on the built-in CD/Video CD player to an MD (or tape) on an external MD recorder (or DAT) by connecting the DIGITAL OUT (OPTICAL) terminal on the rear of the main unit to the MD recorder (or DAT).