Yamaha H01 Owner's Manual - Page 10
Turning the Power On, Setting the Volume, Using Headphones
View all Yamaha H01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
ENGLISH Before Using the H01 Turning the Power On 1. Insert the plug of the power cable into the AC connector on the instrument, then plug the other end of the cable into the proper AC outlet on the wall. CAUTION Never interrupt the power supply during the instrument load operation! Doing so can result in loss of data. 2. Press the [POWER] switch to turn the power on. The power indicator located to the right of the [POWER] switch lights up. NOTE All current panel settings will be changed to the initial settings when turning the power off and on. CAUTION Never interrupt the power supply while the instrument is loading data from a USB device! Doing so can result in loss of data. CAUTION Even when the instrument is turned off, electricity is still flowing to the instrument at the minimum level. When you are not using the H01 for a long time or during electrical storms, make sure you unplug the AC power plug from the wall AC outlet. (The shape of plug differs depending on locale.) Setting the Volume Initially set the [MASTER VOLUME] slider about halfway between the "MIN" and "MAX" settings. Then, when you start playing, re-adjust the [MASTER VOLUME] slider to the most comfortable listening level. TERMINOLOGY MASTER VOLUME: The volume level of the entire keyboard sound. The level decreases. The level increases. Using Headphones Connect a set of headphones to one of the [PHONES] jacks. Two [PHONES] jacks are provided. You can connect two sets of stereo headphones. (If you are using only one set of headphones, you can plug them into either jack.) It can also connect to an amplifier/speaker system. CAUTION To protect your hearing, avoid listening to the H01 at a high volume level for long periods of time. Stereo mini plug 8 10 H01 Owner's Manual