Yamaha HTR-5440RDS Owner's Manual - Page 40

SET MENU 3 I/O ASSIGN It is possible to assign jacks according to the component to be used if this unit's DIGITAL INPUT jack settings (component names for jacks) differ from that component. This makes it possible to change the jack assignment and effectively connect more component. Once you assign, you can select that component with INPUT l / h (or the input selector buttons). I 3A (1) and (2) (for the OPTICAL INPUT jacks) Initial settings: (1) DVD (2) D-TV/CBL I 3B (3) (for the COAXIAL INPUT jack) Initial setting: (3) CD Note • You cannot select an item more than once for the same type of jack. 4 INPUT MODE (initial input mode) Use this feature to designate the input mode when turning on the power of this unit with the source component connected to more than one type of input jacks. Choices: AUTO, LAST Initial setting: AUTO 5 DOLBY D. SET (Dolby Digital set) This setting is effective only when this unit decodes Dolby Digital signals. I LFE LEVEL Use this feature to adjust the output level of the LFE (lowfrequency effect) channel when playing back a Dolby Digital signal. The LFE signal carries the low-frequency special effect sound which is only added to certain scenes. Control value (dB): -20 to 0 Initial setting: 0 dB dB Notes • Adjust the LFE level according to the capacity of your subwoofer. • Normally, around -6 dB to -8 dB is most suitable for listening at home. I D-RANGE (dynamic range) Use this feature to adjust the dynamic range (the difference between the maximum level and the minimum level of sounds). Choices: MAX, STD (standard), MIN Initial setting: MAX • Select MAX for feature films. • Select STD for general use. • Select MIN for listening to sources at an extremely low volume level. MAX Dialog level Output level AUTO Select this to allow this unit to automatically detect the type of input signal and select the appropriate input mode. LAST Select this to set this unit to automatically select the last input mode used for that source. Input level STD Dialog level H-LEVEL CUT 0.0 1.0 MIN Dialog level Output level Output level 1.0 0.0 L-LEVEL BST Input level Input level Note • When you select MIN, the sound output may be faint because some Dolby Digital signals are not compatible with the minimum-level dynamic range. In this case, select MAX or STD. 38