Yamaha HTR 5550 MCXSP10 Manual - Page 25
ADJUSTING SPEAKER OUTPUT LEVELS, Using the test tone
UPC - 027108913957
View all Yamaha HTR 5550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
INTRODUCTION PREPARATION BASIC OPERATION ADJUSTING SPEAKER OUTPUT LEVELS This section explains how to adjust speaker output levels using the test tone generator. When this adjustment is complete, the output level heard at the listening position should be the same from each speaker. This is important for best performance of the digital sound field processor, and the various decoders (Dolby Digital, Dolby Pro Logic, Dolby Pro Logic and DTS). Note • Since this unit cannot enter the test mode while headphones are connected to this unit, be sure to unplug the headphones from the PHONES jack when using the test tone. Using the test tone Use the test tone to balance the output levels of the speakers. The adjustment of each speaker output level should be made at your listening position using the remote control. 3 3 Set the BASS and TREBLE controls on the front panel to the center position and adjust the volume of this unit so you can hear the test tone. The test tone is heard (in order) from the main left speaker, center speaker, main right speaker, rear right speaker, rear left speaker, and the subwoofer. The tone is produced for 2.5 seconds from each speaker. VOLUME + VOLUME or - BASS TREBLE Remote control - +- + Front panel LEFT RIGHT NATURAL SOUND AV RECEIVER INPUT M0DE INPUT VOLUME 6CH INPUT STANDBY /ON SILENT PHONES STEREO EFFECT PROGRAM MEMORY TUNING MODE FM/AM PRESET/TUNING MAN'L/AUTO FM AUTO/MAN'L MONO EDIT PRESET/TUNING A/B/C/D/E BASS - + TREBLE - + *SUBWOOFER CENTER 4 2,5 VCR A B AMP ++ + TV VOL TV CH -- VOLUME - TV MUTE TV INPUT MUTE HALL 1 JAZZ CLUB 2 ROCK CONCERT 3 ENTERTAINMENT 4 TV SPORTS 5 MONO MOVIE 6 MOVIE MOVIE THEATER 1 THEATER 2 7 8 /DTS SUR. 9 SELECT 0 MATRIX 6.1 STEREO +10 ENTER LEVEL TITLE - PRESET/CH SELECT EFFECT SET MENU MENU A/B/C/D/E + TEST RETURN DISPLAY 1 3 1 Press AMP. AMP 3 2 Press TEST to output the test tone. TEST RETURN L SUR. R SUR. * Subwoofer test tone is output after the rear left speaker (LEFT SURROUND). The front panel display shows which speaker is outputting the test tone. Note • If the test tone cannot be heard, turn down the volume, set this unit to standby mode and check the speaker connections. ADVANCED OPERATION ADDITIONAL INFORMATION APPENDIX English 21