Yamaha IIs Owner's Manual - Page 19
Power, Connecting to a Power Source, Power-On Sequence - dtxtreme power supply
UPC - 086792645445
View all Yamaha IIs manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Setup Power Connecting to a Power Source Make sure that the STANDBY/ON switch is in the STANDBY position. Plug the supplied AC power adapter to the DC IN jack on the DTXTREME IIs rear panel. Fix the power cord to the cable hook, ensuring that the adapter plug does not come loose. Connect the adapter to an AC outlet. Cable fook R L MONO OUTPUT STANDBY DC IN 12V ON + 3 TOM2 2 TOM1 1 SNARE AC power adapter To AC outlet Always use the supplied AC power adapter (PA-5C or PA-5D). Use of a power adapter other than the type specified may cause a malfunction or result in damage to the DTXTREME IIs. Also, unplug the power adapter from the AC outlet if the DTXTREME IIs is not used for an extended period of time. Power-On Sequence After you've made all necessary connections (trigger, audio, MIDI), turn down all volume controls of the DTXTREME IIs and other audio equipment. Turn on your system in the order of the audio signal flow (first the mixer, then the amplifier or powered speakers). DRUM TRIGGER MODULE MIDI master devices DTXTREME IIs Audio equipment (first mixer, then amplifier) The DTXTREME IIs displays a splash screen, and then shows PLAY mode screen. Now you can start playing. KIT=P1 SONG=P1 TEMPO BEAT CLICK Kit name Songname =107 4/4 If you are ready, see the next page for detailed explanations on how to use the DTXTREME IIs system. n When turning off your system, first turn down all volume controls for the audio equipment, then turn off devices in the reverse order of the audio signal flow. 19