Yamaha M7CL M7cl V1 Editor Installation Guide - Page 7

Network settings of the M7CL • When connecting the computer to the M7CL directly. You can use the following initial settings. IP address Gateway address Subnet mask 192.168.0.128 192.168.0.1 255.255.255.0 • When you connect the computer to the M7CL via LAN. Set the appropriate address in accordance with LAN. Your computer and the M7CL should exist in the same subnet in the same network address. IP address Gateway address Subnet mask Sets the IP address so that it does not conflict with the IP address of any other device on the network. If you set the IP address, the first three numbers are automatically set. Set the last number of the IP address of the gateway when the gateway exists. Set the vacant address when the gateway does not exist.You should set the address in the same subnet as IP address.The address should be set in the same subnet as IP address within LAN in which the subnet is set. Use an initial setting of [255.255.255.0] in LAN environment in which the subnet is not set. In LAN in which the subnet is set, set the address in accordance with the environment. Network settings of computer If you are connecting the M7CL to your computer in a one-to-one connection, we recommend that you make the following settings. IP address Subnet mask Default gateway 192.168.0.3 255.255.255.0 192.168.0.1 However, it must not conflict with the IP address of any other device on the network. n The M7CL cannot be directly connected if the IP address is assigned automatically. Please contact your network administrator for further detail. M7CL Editor Installation Guide 7