Yamaha MCR730B User Manual - Page 53

Chapter 7: Portable Device Playback Bluetooth playback With an optional Yamaha YBA-10 Bluetooth Wireless Audio Receiver connected to the DRX-730's DOCK jack, you can enjoy the music stored on your Bluetooth device, for example, a Bluetoothcompatible music player or mobile phone, through the DRX-730's speakers in high quality. You can also use the DRX-730's remote control to control music playback on your Bluetooth device. Notes: • Set the DRX-730 to standby and disconnect its power cable before connecting or disconnecting the Yamaha YBA-10. • Refer to the Yamaha YBA-10 owner's manual for details on using the YBA-10. • Refer to your Bluetooth device owner's manual for details on using your Bluetooth device. • Depending on your Bluetooth device model and its firmware version, some playback functions may not work as expected, and some may not work at all. ■ Bluetooth pairing Before you can use a Bluetooth device with the DRX-730, you must pair, or register it with the Yamaha YBA-10. 1 Press DOCK to select the DOCK input source. 2 Turn on the Bluetooth device and make sure it's discoverable. 3 Press and hold down BLUETOOTH ON for 3 seconds to start pairing. Pairing starts, the DOCK indicator flashes, and "Searching..." appears on the display. During pairing, the Yamaha YBA-10 searches for compatible Bluetooth devices and registers any that are found. Pairing only needs to be performed when a Bluetooth-device is used with the Yamaha YBA-10 for the very first time, or when the pairing information has been deleted. See the Yamaha YBA-10 owner's manual for more details on pairing. To cancel pairing, press BLUETOOTH OFF. ■ Bluetooth setup 4 Make sure the Bluetooth device has detected Using the dock cable supplied with the Yamaha YBA-10, connect one end of the cable to the Yamaha YBA-10, and connect the other end to the DOCK jack on the DRX-730's rear panel. the Yamaha YBA-10. The Yamaha YBA-10 will appear as "YBA-10 YAMAHA" or something similar on the Bluetooth device. 7 MAINS HDMI CLASS 2 WIRING CABLAGE CLASSE 2 R 6 MIN SPEAKER SPEAKERS R SUBWOOFER OUT OUT IN AUX AM ANT GND FM ANT 75 UNBAL. PR PB DOCK Y OUT VIDEO COMPONENT VIDEO OUT OPTICAL DIGITAL 5 On the Bluetooth device, select the Yamaha YBA-10, and then enter the pass key "0000". When pairing is complete, the message "Completed" appears on the display. Note: • Pairing will be cancelled if no compatible Bluetooth devices are found within 8 minutes, the input source is changed on the DRX-730, or the DRX-730 is set to standby. Dock cable (supplied with Yamaha YBA-10) ■ Connecting Bluetooth devices Once a Bluetooth device has been paired with the Yamaha YBA-10, you can connect to it and play the music stored on it. Yamaha YBA-10 1 Press DOCK to select the DOCK input source. English 2 Press BLUETOOTH ON. The Yamaha YBA-10 attempts to connect to the last Bluetooth device used or paired and "Searching..." appears on the display. When a connection is established, "BT connected" appears on the display. 47 En