Yamaha MCR730B User Manual - Page 54

Chapter 7: Portable Device Playback 3 Use the DRX-730's remote control, or the Bluetooth device's controls to play the music stored on the Bluetooth device. To disconnect a Bluetooth device and make the DRX-730 non-discoverable, press BLUETOOTH OFF. The message "Disconnected" appears on the display. To connect to another Bluetooth device, you must first disconnect from the currently connected device, and then initiate a connection on the other Bluetooth device. ■ Playback control The following DRX-730 remote control buttons can be used to control playback on a Bluetooth device. Point the remote control at the DRX-730, not the Bluetooth device. Button Play ( ) Pause ( ) Stop ( ) Next ( ) Previous () Description Starts playback1 Pauses playback1 Stops playback Selects the next track Selects the beginning of the current track. Press again to select earlier tracks. 1. Depending on the Bluetooth device, the Play and Pause buttons may work as Play/Pause buttons. Notes: • The DRX-730's remote control can only be used to control a Bluetooth device while its connected to that device. • Even if several devices have been registered through pairing, if the last connected Bluetooth device is not found, the Yamaha YBA-10 will not attempt to connect to any of the other devices. • The DRX-730 will automatically disconnect from the currently connected Bluetooth device when a disconnection is initiated on that device, communication becomes impossible because the device is too far away, or the DRX-730 is set to standby. • The Bluetooth device will not be disconnected when a different input source is selected on the DRX-730. • The Yamaha YBA-10 only supports Bluetooth music players and mobile phones that are compatible with A2DP or AVRCP. • Bluetooth has a line of sight operating range of up to 10 meters (33 ft.). Make sure there are no obstacles between the Yamaha YBA-10 and your Bluetooth device. 48 En