Yamaha MCX-C15P Owners Manual - Page 15

00_MCX-C15_Owner_UB.book Page 14 Tuesday, April 20, 2004 9:32 PM TURNING ON THE POWER When your client is ready for operation, turn on the power. The client has two operation modes: On The client is connected to a power source and is in operation mode. Sleep The client is connected to a power source and activates only when the unit is operated or it receives an infrared signal from the remote control. In this mode, this unit consumes a small amount of power in order to receive infrared signals from the remote control. MCX-3 WD01440 LIBRARY MUTE VOL FAVORITES 1 2 3 4 1 Before proceeding, make sure the power to the MCX-1000 server is turned on. 1 Press on either the remote control or front panel. The client turns on and the MusicCAST Startup screen is displayed. 2 The client attempts to connect to the server, and the following screen is displayed. Connecting... SELECT MENU 1 PLAY INFO. PAUSE 2 INPUT BOOKMARK RANDOM 3 STOP 4 5 REPEAT 6 GROUP PLAY 7 GROUP S RECALL OFF TIMER ON TIMER 3 If the client is able to make a connection, the Top Menu screen appears and the network connection icon appears in the top right corner of the display. Network connection icon or 1 MCX-C15 MENU 1 2 3 FAVORITES VOL 4 Top Menu Library Recall Play If the client is unable to connect to the server, it continues displaying the "Connecting..." message. Press any button on the client to cancel the connection process, then check that your client network connection settings are correct (see page 54). Note If no operation is performed for 30 minutes, the client automatically switches to sleep mode. Press SELECT or to reactivate the client. 14