Yamaha MCX-C15P Owners Manual - Page 57

00_MCX-C15_Owner_UB.book Page 56 Tuesday, April 20, 2004 9:32 PM TROUBLESHOOTING Problem Cause Remedy Refer to page None of the controls other than the volume control have any effect on the client. The client is locked from the server. Use the server to remove the lock. MCX-1000 Owner's Manual, page 93 Starting The client and the radio are too Place the client and the radio at playback on the close to each other. least one meter apart. client produces interference - noise on nearby radios. There is a This is normal when listening significant with the client. pause between playback of - songs on the client. You cannot access a preset radio station on a YAMAHA AV receiver connected to your MusicCAST system. The ANALOG REC LEVEL on the front panel of the server is set too low. The parameters for the AV receiver connected to the server are incorrect. The AV receiver connected to the server is not turned on. Increase the ANALOG REC LEVEL. Configure the AV receiver parameters correctly. Turn the AV receiver on. MCX-1000 Owner's Manual, page 29 MCX-1000 Owner's Manual, page 122 - The AV receiver is not correctly connected to the server. Correctly connect the AV receiver to the server. MCX-1000 Owner's Manual, page 13 The AV receiver is not Refer to the owner's manual of receiving a strong radio signal. your AV receiver. - Playback cuts Another MusicCAST Stop the other MusicCAST off or switches component is changing the component from changing input to another input tuner preset or external input sources. when listening on the server. - to a tuner preset on the client. 56