Yamaha MCX-SP10 MCXSP10 Manual - Page 4

CONNECTING TO YOUR MCX-A10 Before making connections, make sure that the MCX-A10 is switched off. I Connections • Connect the push-type input terminals at the rear of the speakers to the SPEAKER OUT terminals of the MCX-A10 with the speaker cable provided. • Connect the (+) terminals on the MCX-A10 and the speakers using one side of the cable. Connect the (-) terminals on both components using the other side of the cable. • Connect one speaker to the left (marked L) terminals of your MCX-A10, and the other speaker to the right (marked R) terminals, making sure not to reverse the polarity (+, -). If one speaker is connected with reversed polarity, the sound will be unnatural and lack bass. I How to connect 1. Press and hold the terminal's tab. 2. Remove the insulation coating at the extremity of each speaker cable by twisting the coating off. 3. Insert the bare wire. 4. Release the tab to allow it to lock securely on the cable's wire end. Black Red Gray line MCX-SP10 MCX-SP10 (Right) (Left) L +--+ +--+ R SPEAKER OUT LAN AUX IN L PREOUT R S.WOOFER VIDEO OUT L R SPEAKER OUT DC IN 12V MCX-A10 Cautions • This speaker is specifically designed for use with the MCX-A10. If you connect it to any other component, take care not to damage the speaker by exceeding its rated input. • Do not let the bare speaker wires touch each other as this could damage the speaker or the MCX-A10, or both of them. 3 English