Yamaha MCX-SP10 MCXSP10 Manual - Page 5

REMOVING THE FRONT COVER The front cover is fastened to the enclosure at four points and can be removed if desired. To remove the cover, hold on to both sides and slowly pull straight away from the speaker. To reattach, line up the four holes on the inner surface of the cover with the four corresponding pegs on the speaker and push gently. SPECIFICATIONS Type 2-way bass reflex speaker system Magnetic shielding type Driver 10 cm (4") cone woofer 2.5 cm (1") dome tweeter Impedance 4 Ω Frequency Response 100 Hz to 27 kHz Nominal Input Power 20 W Sensitivity 89 dB/2.83 V/m Dimensions (WxHxD 210 x 210 x 79 mm (8-5/16" x 8-5/16" x 3-1/10") Weight 1.2 kg (2 lbs 10oz) x 2 Caution • When the cover is removed, take care not to touch the speaker units with your hands or to exert excessive force with tools. • Specifications are subject to change without notice due to product improvements. • Care should be taken not to exceed the input power values noted above. 4