Yamaha MG10 Owner's Manual - Page 3
For correct operation, Connector pin assignments, Replacement of Consumable Parts - mixer
View all Yamaha MG10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Precautions -For correct operation - Connector pin assignments G XLR-type connectors are wired as follows Pin 1: ground; Pin 2: hot (+); Pin 3: cold (-). G INSERT TRS phone jacks are wired as follows Sleeve: ground; Tip: send; Ring: return. Replacement of Consumable Parts G The performance of components with movable contacts-such as switches, rotary controls, faders, and connectors-deteriorates over time. While the rate of wear may vary greatly according to usage conditions, some amount of wear is unavoidable. When parts wear out, consult your dealer about appropriate replacements. Interference from Cell Phones G Use of a mobile phone near this unit may induce noise. If noise occurs, move the phone further from the unit. G Always turn the power off when the mixer is not in use. G Even when the power switch is in the "STANDBY" position, electricity is still flowing to the mixer at the minimum level. When you are not using the mixer for a long time, make sure you unplug the AC power adaptor from the wall AC outlet. Copying of commercially available music data and/or digital audio files, except for personal use, is strictly prohibited. Illustrations in this manual are for explanatory purposes only, and may not match the actual appearance of the product during operation. Company names and product names used in this Owner's Manual are trademarks or registered trademarks of their respective owners. IMPORTANT NOTICE FOR THE UNITED KINGDOM Connecting the Plug and Cord IMPORTANT. The wires in this mains lead are coloured in accordance with the following code: BLUE : NEUTRAL BROWN : LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured makings identifying the terminals in your plug proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth terminal of the three pin plug. • This applies only to products distributed by Yamaha-Kemble Music (U.K.) Ltd. (2 wires). MG10/2 3