Yamaha MG16 Owner's Manual - Page 27
Rack Mounting, Mounting - 6fx rack mount
View all Yamaha MG16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Rack Mounting I Mounting (1) Two metal rack-mount supports are screwed onto the unit. Use a screwdriver to remove these supports. (2) Turn the supports over, and fasten them into place again using the same screws. (3) Mount the unit into the rack, and fasten it into place. NOTE If you wish you may move the left support to the right side and the right support to the left side, as shown in the drawing. Do not install the mixer near power amps or other heat-generating devices. Setting Up MG16/6FX 27
Setting Up
MG16/6FX
27
■
Mounting
(1)
Two metal rack-mount supports are screwed onto the unit. Use
a screwdriver to remove these supports.
(2)
Turn the supports over, and fasten them into place again using
the same screws.
(3)
Mount the unit into the rack, and fasten it into place.
If you wish you may move the left support to the
right side and the right support to the left side, as
shown in the drawing.
Do not install the mixer near power amps or other
heat-generating devices.
Rack Mounting
NOTE