Yamaha MG16 Owner's Manual - Page 28

Appendix Specifications 28 I General Specifications Frequency Characteristics (ST OUT) Total Harmonic Distortion (ST OUT) Hum and Noise 1 Maximum Voltage Gain 2 Monaural/Stereo Input Gain Control Monaural/Stereo High Pass Filter Crosstalk (1 kHz) Monaural Input Channel Equalization: Max. Variation (CHs 1 to 8) 3 Stereo Input Channel Equalization: Max. Variation (CHs 9/10 to 15/16) 3 Graphic Equalizer Internal Digital Effects Monaural/Stereo Input Peak Indicator Level Meters Phantom +48 VDC Power (Balanced input) Included Accessory Power Supply Power Consumption Max. Dimensions (W × H × D) Weight 20 Hz-20 kHz +1 dB, -3 dB @+4 dBu, 600 Ω (with gain control at minimum level) 0.1% (THD+N) @+14 dBu, 20 Hz-20 kHz, 600 Ω (with gain control at maximum level) -128 dBu Equivalent input noise (CHs 1 to 8) -100 dBu Residual output noise (ST OUT) -88 dBu (92 dB S/N) ST, GROUP Master fader at nominal level; all Ch assign switches off. -81 dBu (85 dB S/N) AUX, EFFECT master control at nominal level; all channel mix controls at minimum level. -64 dBu (68 dB S/N) ST, GROUP Master fader and one Ch fader at nominal level. (CHs 1 to 8) 60 dB CH MIC INPUT → CH INSERT OUT 84 dB CH MIC INPUT → GROUP OUT/ST OUT (CH to ST) 94 dB CH MIC INPUT → ST OUT (GROUP to ST) 62.2 dB CH MIC INPUT → REC OUT (CH to ST) 76 dB CH MIC INPUT → AUX SEND (PRE) 86 dB CH MIC INPUT → AUX SEND (POST)/EFFECT SEND 58 dB CH LINE INPUT → GROUP OUT/ST OUT (CH to ST) 84 dB ST CH MIC INPUT → GROUP OUT/ST OUT (CH to ST) 58 dB ST CH LINE INPUT → GROUP OUT/ST OUT (ST to ST) 47 dB ST CH LINE INPUT → AUX SEND (PRE) 57 dB ST CH LINE INPUT → AUX SEND (POST)/EFFECT SEND 34 dB ST CH INPUT → GROUP OUT/ST OUT (ST to ST) 16 dB AUX RETURN → ST OUT 9 dB AUX RETURN → AUX SEND 27.8 dB 2TR INPUT → ST OUT 44 dB variable 80 Hz 12 dB/octave -70 dB between input channels -70 dB between input/output channels (CH INPUT) ±15 dB HIGH 10 kHz shelving MID 0.25-5 kHz peaking LOW 100 Hz shelving ±15 dB HIGH 10 kHz shelving HI-MID 3 kHz peaking LO-MID 800 Hz peaking LOW 100 Hz shelving 7-band (125, 250, 500 1 k, 2 k, 4 k, 8 k) Max. Variation ±12 dB 16 programs, parameter control On each channel: red indicator lights if post-EQ signal (on ST channels, if either post-EQ signal or post-mic-amp signal) comes within 3 dB of the clipping level. Two 12-point LED meters [Stereo (L, R)] Peak point: red indicator +5, +3, +1, and 0 points: yellow indicators -1, -3, -5, -7, -10, -15, -20: green indicators Supplied when Phantom +48 V switch is ON. Power adaptor (PA-30) USA and Canada: Europe: Australia: Korea: 120 V 230 V 240 V 220 V AC, 60 Hz AC, 50 Hz AC, 50 Hz AC, 60 Hz 51 W 423 × 108 × 416.6 mm 5.5 kg Where 0 dBu = 0.775 V and 0 dBV = 1 V 1 Rs = 150 ohms Measured with 12.7 kHz, -6 dB/oct. low pass filter (equivalent to 20 kHz, -∞ filter). (CH MIC INPUT to ST, GROUP OUT/AUX, EFFECT SEND) 2 Turning PAN/BAL to left or right. 3 Shelving turnover/rolloff frequency: 3 dB before maximum cut or boost. MG16/6FX