Yamaha MM1402 Owner's Manual - Page 13

Specifications s General Specifications Maximum output level +20dB* (ST OUT L/R) @600Ω, 0.5% THD at 1kHz +20dB* (AUX SEND 1-2) @600Ω, 0.5% THD at 1kHz Total harmonic distortion < 0.1% @+14dB* 20Hz-20kHz (ST OUT L/R @600Ω, AUX SEND 1-2 @600Ω) Frequency response 20Hz-20kHz +1dB, -2dB @+4dB* (ST OUT L/R @600Ω, AUX SEND 1-2 @600Ω) Hum and noise (Average, Rs=150Ω) (20Hz-20kHz) -127dB* Equivalent input noise (INPUT 1-6) -95dB* Residual output noise (ST OUT L/R @600Ω, AUX SEND 1-2 @600Ω) -78dB*(ST OUT L/R) Master fader: All channel fader: nominal minimum -63dB*(67dB S/N)(ST OUT L/R) Master fader: One channel fader: nominal nominal -78dB*(AUX SEND 1-2) Master level control: nominal All channel AUX level control: minimum -63dB*(67dB S/N)(AUX SEND 1-2) Master level control: One channel fader: One channel AUX control: nominal nominal Maximum voltage gain 84dB INPUT (1-6) → ST OUT 44dB INPUT (7L-14R) → ST OUT 76dB INPUT (1-6) → AUX SEND1 86dB INPUT (1-6) → AUX SEND2 62dB INPUT (1-6) → REC OUT 70dB INPUT (1-6) → MONITOR OUT (PFL SW ON) 30dB AUX RETURN → ST OUT 10dB SUB IN → ST OUT 28dB TAPE IN → ST OUT Crosstalk -70dB @ 1kHz adjacent input channels -70dB @ 1kHz adjacent output channels Gain control (1-6) 46dB variable range INPUT (7L-14R) Input Level Selector +4/-10/-20dB* INPUT (1-6) Channel equalization ±15dB maximum boost or cut HIGH 12kHz shelving MID 2.5kHz peaking LOW 80Hz shelving INPUT (7L-14R) Channel equalization ±15dB maximum boost or cut HIGH 12kHz shelving LOW 80Hz shelving ST OUT Graphic EQ ±12dB at 100, 400, 1k, 5k, 10kHz LED meters 0dB=+4dB* Output level Channel PEAK indicators Red LED on each channel lights when post-EQ signal reaches 3dB below clip level. Phantom power +48V, DC Power requirements US & Canadian Models: General Model: AC 120V, 60Hz AC 230V, 50Hz Power consumption US & Canadian Models: General Model: 40W 40W Dimensions (W × H × D) 430 × 104.9 × 360.1 mm Weight 6.5kg * 0dB=0.775Vrms. 8