Yamaha MOTIF6 Owner's Manual - Page 96

Quick Start Guide Using as a Master Keyboard 4 Call up the display for Zone editing. Press any of the buttons. 1 2 3 4 MODE VOICE PERFORM MASTER SEQUENCER SONG PATTERN FILE INTEGRATED SAMPLING MIXING UTILITY EDIT JOB STORE COMPARE SCENE STORE SET LOCATE SONG SCENE SF 1 SF 2 SF 3 SF 4 SF 5 INFORMATION F1 F2 F3 F4 F5 F6 DEC/NO EXIT INC/YES ENTER EXECUTE DRUM KITS FAVORITES COMMON MUSIC PRODUCTION SYNTHESIZER Integrated Sampling Sequencer Real-time External Control Surface Modular Synthesis Plug-in System SLOT 1 SLOT 2 SLOT 3 PRE 1 PRE 2 PRE 3 GM USER PLG 1 PLG 2 PLG 3 CATEGORY SEARCH A. PIANO KEYBOARD ORGAN A B C GUITAR/ PLUCKED D BASS E STRINGS BRASS REED/PIPE F G H SECTION BANK GROUP SYN LEAD SYN PAD/ SYN COMP CHROMATIC DRUM/ SE CHOIR PERCUSSION PERCUSSION 1 2 3 4 5 6 MUSICAL FX COMBI 7 8 TRACK SELECT ELEMENT/PERF.PART/ZONE 9 10 11 12 13 14 15 16 MUTE NUMBER SOLO 7 Store the settings to a Master (page 94). 5 Call up the TRANS display. 1 Set the TG Switch of Zone 1 to on and set those for all other Zones to off. This is for transmitting the data played only in the Zone 1 to the built-in tone generator. 2 Set the MIDI Switch of the Zone 2 and 3 to on and set the ones of the other Zones to off. This is for transmitting the data played in the Zone 2 and 3 to the external tone generator. 3 Set the MIDI transmit channel of Zone 1 to 1. Set the MIDI transmit channel of Zone 2 and 3 to match the Receive channel of the external tone generator (slave). 4 Make sure the external tone generator is set to multi-timbral operation (different voices for each of the 16 MIDI channels), and select the appropriate voices on the tone generator, corresponding to the MIDI channels you set in 3 above. SF 1 SF 2 SF 3 SF 4 SF 5 F1 F2 F3 F5 F6 SF 1 SF 2 SF 3 SF 4 SF 5 F1 F2 F3 F5 F6 6 Call up the NOTE display. 1 Set the Note Limit H (High) of Zone 1 to B2. Set the Note Limit L (Low) of Zone 1 to C-2. 2 Set the Note Limit H (High) of Zone 2 and 3 to G8. Set the Note Limit L (Low) of Zone 2 and 3 to C3. Each Zone will sound the assigned voice within the note range set above. ● Control Number settings Here in the KN/CS display of the Master Edit mode, you can set how the Control knobs and sliders will affect each Zone. This lets you specify a MIDI Control Change number for each knob and slider. In the example below, the Control knobs for all Zones have been set to 10 (Pan), and the sliders have been set to 11 (Expression). In this way, you can control the stereo position of each Zone with the appropriate knob, and use the sliders to adjust the relative volume balance among the Zones. This setting is available only when the Zone Switch is set to on from the Memory display in the Master Play mode. CUTOFF RESONANCE ATTACK ASSIGN A ASSIGN B ASSIGN 1 RELEASE ASSIGN 2 SF1 SF2 SF 3 SF4 SF5 F1 F2 F3 F4 F5 F6 KN 1 KN 2 KN 3 KN 4 MEQ LOW MEQLOWMID MEQ HI MID MEQ HIGH 96 MOTIF Quick Start Guide