Yamaha MTX-MRX MTX-MRX Editor Users Manual [English] - Page 24

Workflow Chapter 1. An overview of MTX-MRX Editor Verify that the firmware versions of the devices are compatible with MTX-MRX Editor. For details, refer to the "Device Information" dialog box which you can access from the [System] menu. For information about firmware compatibility with MTX-MRX Editor, refer to the Yamaha Pro Audio website. http://www.yamahaproaudio.com/japan/ja/  Synchronize your computer and the devices (put them in the online state). Click the [Online] button in the toolbar to open the "Synchronization" dialog box, check "To Device", and click the [OK] button. When the dialog box indication has switched, select the check box of the system that you want to place online, and click the [Online] button. The contents of the MTR-MRX Editor's settings are sent to each device. In the online state, the indicator will light blue as shown below. NOTE • When online, the computer's time will be sent to each device. • The Daylight Saving Time setting will reflect the "Date and Time" settings of the computer that was used to first create the applicable project file. If you want to change the Daylight Saving Time settings of a project file that was created on a computer for which Daylight Saving Time was not enabled, or a computer with a different time zone setting, open the "Daylight Saving Time" dialog box from the [System] menu and change the settings.  24 MTX-MRX Editor User Guide