Yamaha NS 777 Owner's Manual - Page 4

[Bi-Wired Connection] Remove the short bars before connecting. Tweeter terminals Mid-woofer/ woofer terminals NS-777/ NS-555 (R) NS-777/ NS-555 (L) NS-777/ NS-555 (R) + NS-777/ NS-555 (L) . PLACING THE SPEAKERS Place the speakers on a sturdy, vibration-free surface, on a well-built stand. IUsing as 2ch stereo speakers Better stereo images will be obtained when the speakers are slightly angled in towards the listeners. SPEAKERS R L +- -+ Amplifier or Receiver SPEAKERS R +- L A -+ B Amplifier or Receiver Both SPEAKERS A and B should be selected. IUsing as main speakers in a multi channel system Position the speakers on both sides of the TV. The positioning of speakers is important, because it controls the whole sound quality of a multi channel system. Set up the speakers on the basis of your listening position by following the owner's manual supplied with your amplifier. NS-777/ NS-555 This speaker system is capable of bi-wired connections. To connect the speaker to the output terminals of the amplifier (or receiver), two pairs of cables for each of mid-woofer/ woofer and tweeter used instead of standard connections. This type of connection decreases the modulation distortion caused by electric resistance of the cables and driving current of the speakers. Consequently, purer sound quality can be expected. To utilize bi-wired connections, remove the short bars from the terminals first, and then connect the mid-woofer/ woofer and tweeter to the amplifier separately using two pairs of cables. NS-777/ NS-555 Subwoofer Center Rear effect Note This speaker features a magnetically shielded design, but there is still a chance that placing it too close to a TV set might impair picture color. Should this happen, move the speaker away from the TV set. 4