Yamaha NS-M525 Owners Manual - Page 4

REMOVING THE FRONT COVER, Maximum Input Power - dimensions

Page 4 highlights

REMOVING THE FRONT COVER The front cover is attached to protect the speaker unit, but you can remove it if necessary. The front cover is fixed by magnets. Hold the speaker with one hand, and pull the front cover gently with the other to remove it. Notes: • When removing the cover, be careful that you don't touch the drive units, and don't exert excessive force with any tools. • There are magnets on the reverse side of the front cover. Do not place the front cover close to objects that might be affected by magnets, such as TVs, clocks, magnetic cards, diskettes etc. after removing it. SPECIFICATIONS Type 2-way bass reflex speaker system Magnetic shielding type Driver 13 cm (5") cone woofer 3 cm (1") dome tweeter Impedance 6 Ω Frequency Response 60 Hz to 50 kHz (-10d B) Nominal Input Power 30 W Maximum Input Power 120 W Sensitivity 89 dB/2.83 V/m Crossover Frequency 3 kHz Dimensions (WxHxD 176 x 323 x 192.6 mm (6-15/16" x 12-11/16" x 7-9/16") Weight 4.5 kg (9 lbs.14.7 oz.) • Specifications are subject to change without notice due to product improvements. • Care should be taken not to exceed the input power values noted above. E-4

  • 1
  • 2
  • 3
  • 4

E-
4
SPECIFICATIONS
Type
.............................
2-way bass reflex speaker system
Magnetic shielding type
Driver
............................................
13 cm (5”) cone woofer
3 cm (1”) dome tweeter
Impedance
...................................................................
6
Frequency Response
..................
60 Hz to 50 kHz (-10d B)
Nominal Input Power
..................................................
30 W
Maximum Input Power
.............................................
120 W
Sensitivity
..................................................
89 dB/2.83 V/m
Crossover Frequency
................................................
3 kHz
Dimensions (WxHxD)
......................
176 x 323 x 192.6 mm
(6-15/16” x 12-11/16” x 7-9/16”)
Weight
..............................................
4.5 kg (9 lbs.14.7 oz.)
Specifications are subject to change without notice due
to product improvements.
Care should be taken not to exceed the input power
values noted above.
REMOVING THE FRONT COVER
The front cover is attached to protect the speaker unit, but
you can remove it if necessary.
The front cover is fixed by magnets. Hold the speaker with
one hand, and pull the front cover gently with the other to
remove it.
Notes:
When removing the cover, be careful that you don’t
touch the drive units, and don’t exert excessive
force with any tools.
There are magnets on the reverse side of the front
cover. Do not place the front cover close to objects
that might be affected by magnets, such as TVs,
clocks, magnetic cards, diskettes etc. after
removing it.