Yamaha PDP-300 Owner's Manual - Page 15
Troubleshooting, Specifications - digital piano
View all Yamaha PDP-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
TROUBLESHOOTING If you encounter what appears to be a malfunction, please check the following points before assuming that your PDP-300 is faulty. 1. No Sound When the Power is Turned ON Is the AC plug properly connected to an AC wall outlet? Check the AC connection carefully. Is the VOLUME control turned up to a reasonable listening level? 2. The PDP-300 Reproduces Radio or TV Sound This can occur if there is a high-power transmitter in your vicinity. Contact your Yamaha dealer. 3. Intermittent Static Noise This is usually due to turning ON or OFF a household appliance or other electronic equipment which is fed by the same AC mains line as your PDP-300. 4. Interference Appears On Radio or TV Sets Located Near the PDP-300 The PDP-300 contains digital circuitry which can generate radio-frequency noise. The solution is to move the PDP-300 further away from the affected equipment, or vice versa. 5. Distorted Sound When the PDP-300 is Connected to An External Amplifier/Speaker System If the PDP-300 is connected to a stereo system or instrument amplifier and the sound is distorted, reduce the setting of the PDP-300 volume control to a level at which the distortion ceases. SPECIFICATIONS * Specifications subject to change without notice. KEYBOARD VOICE SELECTORS REVERB TOUCH SEVSITIVITY PLAY MODES PEDAL CONTROLS OTHER CONTROLS JACKS/CONNECTORS INPUT &OUTPUT LEVEL/IMPEDANCE MAIN AMPLIFIERS SPEAKERS DIMENSIONS WEIGHT FINISH INCLUDED ACCESSORIES 88 KEYS (A-1 - C7) PIANO 1/2, CLAVINOVA TONE, E.PIANO, HARPSICHORD, ORGAN PEDAL, ROOM, HALL HARD, MEDIUM, SOFT NORMAL, DUAL DAMPER, SOFT/SOSTENUTO MASTER VOLUME, MIDI/TRANSPOSE HEADPHONES, OPTIONAL IN L/R, OPTIONAL OUT L/R, MIDI IN/OUT/THRU OPTIONAL OUT: 600 Ω/1~4 Vpp OPTIONAL IN: 22 k Ω/-10 dBm (for nominal output level) 15 W x 2 16 cm x 2 1418 x 467 x 804 mm 46.0 kg (101.4 lbs.) Black metallic Dust cover, Bench 13