Yamaha PDP-300 Owner's Manual - Page 4
Keyboard Stand Assembly - pedal
View all Yamaha PDP-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
1 A B C D E Main unit Center panel Pedal box Side panels Base boards 3 C D D E E • Short large-head screws (black) • Long screws (gold) x 4 4 • Short large-head screws (black) x 4 • Long screws (black) x 4 • Short screws (black) x 4 • Joint connectors x 4 C B D D E • Long screws (black) • The protruding sections of the metal brackets at each end of the center panel must face upward. 2 • Joint connectors D D E E • Long screws (gold) 2 KEYBOARD STAND ASSEMBLY Note: We do not recommend attempting to assemble the PDP300 alone. The job can be easily accomplished, however, with only two people. z Open the box and remove all the parts. On opening the box you should find the parts shown in the illustration to the above. Check to make sure that all the required parts are provided. x Assemble the side panels (D) and base boards (E). Install the joint connectors in side panels (D) as shown in the illustration, then secure the base boards (E) to the side panels (D) with the long gold-colored screws. * When installing the joint connectors in the holes in the side panels (D), make sure that the arrows printed on their upper surface face in the direction shown in the illustration. * Make sure that the left and right base boards are facing in the proper direction as shown in the illustration. The grooved edge of each base board should face inward.