Yamaha PM1D Owner's Manual - Page 17
USB MIDI Driver, Windows 98 & 98SE - replacement
View all Yamaha PM1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
USB MIDI Driver USB MIDI Driver If you are connecting the console/engine to a USB port on your PC, you'll need to install the Yamaha USB driver. If this driver is already installed, or if you will be using a serial connection (RS-232-C connector), you do not need to install the USB driver. The procedure for installing the Yamaha USB driver PC depends on the version of Windows that you are using. PM1D Manager Driver USB cable CS1D/DSP1D • Windows 98 & 98SE, see page 17 • Windows Me, see page 18 • Windows 2000, see page 18 • Windows XP, see page 19 Windows 95 and NT 4.0 do not support USB. Please use a serial connection. Windows 98 & 98SE 1. Start your PC and Windows, and insert the included CD-ROM into your PC's CD-ROM drive. 2. Power-off the console/engine, and use a USB cable to connect the console/engine to the PC. The USB connector of the console/engine is located in the PC CONTROL section of the rear panel. 3. Turn on the console/engine. The Add New Hardware Wizard appears. If it doesn't appear, try disconnecting and reconnecting the USB cable. Alternatively, open the Add New Hardware control panel. 5. Select "Search for the best driver for your device (Recommended)," and then click Next. The following window appears. 6. Select "Specify a location," and specify "D:\USBdrv_" (replacing "D" with the drive letter of your CD-ROM drive), and then click Next. When the driver is located, "YAMAHA USB MIDI Driver" is displayed, as shown below. 7. Click Next. You may be prompted to insert your Windows CDROM. Do not insert it! Click OK, and in the "Copy files from" section of the subsequent dialog box, enter "D:\USBdrv_" (replacing "D" with the drive letter of your CD-ROM drive), and then click OK. The driver is installed, and the following window appears when the installation is complete. 4. Click Next. The following window appears. 8. Click Finish, and then restart your PC. 17