Yamaha PSR-295 Owner's Manual - Page 11
Connecting headphones (PHONES/OUTPUT jack), Connecting a footswitch (SUSTAIN JACK) - 3 driver
View all Yamaha PSR-295 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Setting Up Make all necessary connections BEFORE turning the power on. Connecting headphones (PHONES/OUTPUT jack) Connecting to a computer (USB terminal) The DGX-205/203, PSR-295/293 speakers are automatically shut off when a plug is inserted into this jack. The PHONES/OUTPUT jack also functions as an external output. You can connect the PHONES/OUTPUT jack to a keyboard amplifier, stereo system, mixer, tape recorder, or other line-level audio device to send the instrument's output signal to that device. WARNING • Avoid listening with the headphones at high volume for long peri- ods of time; doing so may not only result in ear fatigue, it may be damaging to your hearing. CAUTION • To prevent damage to the speakers, set the volume of the external devices at the minimum setting before connecting them. Failure to observe these cautions may result in electric shock or equipment damage. Also, be sure to set the volumes of all devices at their minimum levels and gradually raise the volume controls while playing the instrument to set the desired listening level. Connecting a footswitch (SUSTAIN JACK) Connect the instrument's USB terminal to the USB terminal of a computer, and you can transfer performance data and song files between the two (page 66). To use the USB data-transfer features you'll need to do the following: • Connect the USB terminal of the computer to the USB terminal on the instrument using a standard USB cable. • Install the USB MIDI driver on your computer. Installation of the USB MIDI driver is described on page 71. With this capability you can, for example, use the Musicsoft Downloader software provided on the supplied CD-ROM to transfer songs from your computer to the instrument's flash memory. NOTE • Make sure to purchase a quality USB cable at a musical instrument store, computer store or electrical appliance store. Turn on the power Turn down the volume by turning the [MASTER VOLUME] control to the left and press the [STANDBY/ON] switch to turn on the power. Pressing the switch again turns the power off. The sustain function lets you produce a natural sustain as you play by pressing an optional footswitch. Plug the Yamaha FC4 or FC5 footswitch into this jack and use it to switch sustain on and off. NOTE • Make sure that the footswitch plug is properly connected to the SUS- TAIN jack before turning on the power. • Do not press the footswitch while turning the power on. Doing this changes the recognized polarity of the footswitch, resulting in reversed footswitch operation. Backup data in the flash memory (page 42) is loaded to the instrument when the power is turned on. If no backup data exists on flash memory, all instrument settings are restored to the initial factory defaults when the power is turned on. CAUTION • Even when the switch is in the "STANDBY" position, a small amount of electricity is still being consumed by the instrument. When you are not using the instrument for a long time, make sure you unplug the AC power adaptor from the wall AC outlet, and/or remove the batteries from the instrument. CAUTION • Never attempt to turn the power off when a "WRITING!" message is shown in the display. Doing so can damage the flash memory and result in a loss of data. DGX-205/203, PSR-295/293 Owner's Manual 11