Yamaha PSR-4000 Owner's Manual - Page 112

F4: Style Revoice This function allows you to "revoice" the currently selected style: i.e. change the volume, voice, reverb depth, and chorus depth settings for each accompaniment part. Style Revoice settings are retained in memory if the MEMORY BACKUP parameter in the F7 UTILITY page is ON as long as a good set of backup batteries is installed. q VOLUME OFFSET Use the RHY1, RHY2, BASS, CHD1, CHD2, PAD, PHR1, and PHR2 LCD [v/w] controls to set the volume offset for the corresponding accompaniment parts. The volume offset range is from "-50" to "+50". These settings are relative to the volume parameters available via the ACCOMPANIMENT VOLUME MIXER display. The amount of volume offset set for each part is shown by a graphic volume bar to the right of the VOLUME parameter in the upper section of the display. Press the RECALL PRESET DATA LCD button to recall all preset volume offset settings (all "0"). q VOICE Use the [ ] LCD button to switch between the RHY1/RHY2/BASS/CHD1 and CHD2/PAD/PHR1/ PHR2 parameter groups. Use the GROUP LCD [v/ w] controls for each part to select the voice group, and the v/w LCD [v/w] controls to select the individual voice for that part. Select "- -" to specify the preset voice for any individual part. When the preset voice is selected a "P" appears in the corresponding box to the right of the VOLUME parameter in the upper section of the display. A "V" appears when a non-preset voice has been specified. Press the RECALL PRESET DATA LCD button to recall all preset voices. 108