Yamaha PSR-E253 Owner's Manual - Page 29

Recording Your Performance (Phrase Recording) You can record your performance as a User Song (Song number 103), which can then be played back on the instrument. NOTE • A total of approximately 300 notes can be recorded to the User Song. 1 Select the desired Voice. 2 Press the [PHRASE REC] button to enable the Record mode. UserSong 001 4 Press the [START/STOP] button to stop recording. 5 To play back the recorded Song, press the [START/STOP] button. NOTE • If you make a mistake or want to erase an existing Song, you can delete the User Song. To do this, enable the Record mode in step 2, and then press the [START/ STOP] button twice in succession (without playing the keyboard). Flashes To exit from the Record mode, press the [PHRASE REC] button again. (The display stops flashing.) NOTICE • If the User Song is recorded, the data will be recorded over and erased (you will record over and erase previous data in "User Song"). 3 Play the keyboard to start recording. NOTICE • Never attempt to turn the power off or connect or disconnect the AC adaptor. Doing so can result in a loss of data. NOTE • When recording capacity becomes full during recording, a "Mem Full" message appears on the display, recording is stopped, and the Song select display is shown. • If you press the [START/STOP] button, even if you don't play the keyboard, recording starts. Limitations while recording: • The following settings/operations cannot be recorded: Reverb Level, Style, metronome click, Transpose, Tuning. • The following settings and buttons are not available, or if operated, the new settings cannot be recorded: Split Point, Reverb Type, Chorus Type, [FUNCTION] button, [PORTABLE GRAND] button. PSR-E253/YPT-255 Owner's Manual 29