Yamaha PWK-150 PWK-150 OWNERS MANUAL - Page 3
Components
View all Yamaha PWK-150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Components Wall mounting unit 1 Allen key (accessory) ......1 M5 screw 2 Insulating spacer 4 Toothed pan washer 4 (Fixing screw) Pan head bolt with hex socket (M8-45) .........4 Points to note for installation • The wall mounting unit is for use in installing the wide plasma display to a vertical wall for viewing purposes. Do not use it for any type of installation other than vertical wall installation. • In order to ensure correct, problem-free operation of the wide plasma display, do not install the display in any of the following places. • Places which are next to sprinklers or sensors • Places which are subject to vibration or shocks • Places which are close to high-voltage wires or electric motors • Places in direct contact with air from heaters • When installing this wall mounting unit, use a fixing method appropriate to the type of wall. • Use an M6 bolt (sold separately) appropriate for the type of wall material (wood, steel frame, concrete, etc.) the bracket is to be mounted on. • Insert the power cord plug for the wide plasma display into a wall outlet which is close and easily accessible. • Provide adequate ventilation so that the temperature around the display does not rise above 40°C (104 F°). If there is insufficient movement of the air inside display, heat may build up inside the display, and fire may result. 3