Yamaha QS300 Owner's Manual - Page 18

Rear Panel RISK OF ELECTRIC SHOCK DO NOT OPEN : RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2)THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. MODEL POWER ON/ OFF SER.NO. AC INLET MIDI THRU OUT IN SUSTAIN FOOT FOOT CONTROLLER VOLUME OUTPUT R L/MONO PHONES q w e r ty u i q POWER Switch Push this in to turn the power on, and push again to turn it off. w AC INLET Plug one end of the included power cable to this terminal and the other end to an appropriate AC electrical outlet. e MIDI IN/OUT/THRU Terminals For connection to other MIDI devices, such as a MIDI keyboard, tone generator, sequencer, or to a computer (with MIDI interface). MIDI IN is for input of MIDI data. MIDI OUT is for output of MIDI data; connect this to the MIDI IN of another device, when you want to control/play/record to that device from the QS300. MIDI THRU is for "daisy-chain" connections of additional QS300s or other MIDI instruments. r SUSTAIN Jack For connecting a pedal switch (such as the optional Yamaha FC4 or FC5). When connected, the switch controls sustain on/off. t FOOT CONTROLLER Jack For connecting a foot controller (such as the optional Yamaha FC7). When connected, the foot controller can be used to continuously change various functions and aspects of the sound, depending on settings made in the Voice and Song modes. (See pages 46 and 87.) y FOOT VOLUME Jack For connecting a foot controller (such as the optional Yamaha FC7). When connected, the foot controller is used to continuously change the overall volume of the instrument. u OUTPUT (L/MONO, R) Jacks For mono or stereo output. Connect these to the inputs of a mixer or amplifier. When only the L/ MONO jack is connected, a mono mix of the stereo signal is output though the jack. CAUTION To avoid possible damage to your equipment (and ears!), make sure that both the QS300 and your sound system are turned off when making connections. i PHONES Jack For connection to a set of stereo headphones. Connecting headphones to this jack does not cancel the output through the OUTPUT jacks. 14 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x