Yamaha QS300 Owner's Manual - Page 210
Warning and Error Messages
View all Yamaha QS300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
Warning and Error Messages The following messages may appear during operation, indicating problems or incorrect operation. Follow the instructions in the explanations below to remedy the problem. Warning/Information Messages Battery Low The memory-backup battery is low; memory cannot be backed up. Have the battery changed by your local Yamaha dealer or any other autorized Yamaha service personnel. Now TG-B Mode Active When the System Mode (in the Utility mode, page 189) is set to TG-B, the following modes are not available: Voice Edit mode, Voice Job, Pattern mode, and Phrase mode. Pressing any of the corresponding mode buttons results in the message above; press ) to return to normal operation. Bulk Currently receiving bulk data in a receivable format. Error Messages q Monitor Illegal Input Preset Pattern No Data Illegal Backup Data Improper data was input. Attempted to edit a Preset Pattern. Only User Patterns can be edited. There is no data (in the specified track, measures, etc.), and the job/function cannot be executed. Select a track or range of measures having data and attempt the operation again. The memory-backup battery may have been too low to back up the data properly, resulting in corrupted backup data. Have the battery changed by your local Yamaha dealer or any other autorized Yamaha service personnel. q MIDI MIDI Data Error A data error resulted during reception of MIDI messages. Check that the MIDI cable connections are secure or that the MIDI cable itself is not bad, and attempt the operation again. Checksum Error The checksum of the received System Exclusive message is incorrect. Check the message and try transmitting again. Buffer Full Too much MIDI data is being received by the QS300 at one time. Reduce the amount of data being transmitted. DvNum Cannot receive MIDI bulk data, due to improper Device Number setting (page 190). (Bulk data operations only.) 206 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x