Yamaha R-V902 Owner's Manual - Page 34

LEARNING NEW CONTROL FUNCTIONS (When the lid is open) This is a learning remote control transmitter. The shaded keys in the illustration shown below can be programmed to "learn" control functions from other remote control transmitters. By learning key-functions from other remote control transmitter, this unit can then be used in place of one or more other remote control transmitters, thus making operation of your various audio and video components more convenient. Some of the "learning-capable" keys are originally empty and others have already been preset with functions to control this unit and other Yamaha components. You can store new functions to them (in place of preset functions) as desired. * See page 39 for the learning method. * See page 41 for clearing a learned function (or all learned functions). Note If the memory capacity of the remote control transmitter becomes full, no further learning is possible even if some learning-capable keys are not occupied with new functions. If, for example, you store Yamaha codes only into this remote control transmitter, up to about 20 functions can be stored. Store new functions to the learnable-capable keys which are useful for you. 1 2 3 4 1 *1 CLEAR LEARN MACRO TRANSMIT /LEARN REC/PAUSE A/B TAPE A CD TUNER A DIR B VCR STOP DISC B DVD/LD TV/DBS C PRESET A/B/C/D/E CONCERT PRO LOGIC ENHANCED VIDEO 1 2 3 MONO MOVIE STADIUM DISCO 4 5 6 ROCK HALL 7 8 9 +10 TEST 0 V-AUX PHONO EFFECT ON/OFF TIME/LEVEL DELAY CENTER REAR SWFR SLEEP 2CH/6CH SYSTEM POWER TV MASTER VOLUME 2 VCR OFF A/B/C switch Keys which can have three functions (1, 2, 3, 4) In the "Learning-capable" keys, the keys numbered 1-4 in the illustration at left can have three functions. This is because they have three memory areas (A, B and C). (One function per area.) You can store new functions into the area B and C, and use three functions on a key by switching the memory areas with the A/B/C switch. (Area A cannot learn a new function.) To use these keys: 1. Before using a key, select the area A, B or C of the key on which the function you want to use is stored by using the A/B/C switch. 2. Press the key. The original factory settings of these keys are as follows. The position of A/B/C switch A B C Preset with 1 functions for controlling a Yamaha tape deck. Empty Empty Preset with Empty functions for 2 controlling a Yamaha CD player. (STOP is empty.) Preset with functions for controlling a Yamaha LD player. (DISC is empty.) Preset with 3 functions for controlling the built-in tuner. Empty Empty Preset as the DSP 4 program selector keys and the TEST * key. 2 Preset as the DSP program selector keys and the TEST * key. 2 Preset as the DSP program selector keys and the TEST * key. 2 *2: "+10" is empty. The functions on "9" and "0" are useless. REMOTE CONTROL TRANSMITTER Lid is open. *1: These buttons are used for learning a new function or clearing a learned function (or all learned functions). See page 39-41 for details. 34 Note The area A of all keys cannot learn new functions. To store new functions to these keys, store them onto the area B or C. Empty keys (1, 2) These are empty keys. Each key can learn a function from another remote control transmitter. For example, the TV key is useful for storing the function of your TV's power switch, and the VCR key can be used for your VCR's power switch.