Yamaha R-V902 Owner's Manual - Page 39

LEARNING A NEW FUNCTION 1 Place this remote control transmitter and the other remote control transmitter so that they face each other. This remote control transmitter 4SPORTTVS 1 8JAZZ CLUB 5STADIUM TEST 9CHURCH 2 6DISCO ON/OEFFFFECT 3 PHONO V-AUX Other remote control transmitter About 5-10 cm (2-4 in.) 2 CLEAR LEARN MACRO TRANSMIT /LEARN (Press by using the point of a mechanical pencil, etc.) Flashes slowly. * If there is no operation for about 30 seconds after the LEARN button is pressed, the TRANSMIT/LEARN indicator flashes rapidly and the current mode is canceled. If this occurs, repeat this step. 3 If necessary, select the memory area by using the A/B/C switch on the side panel of the remote control transmitter. 5 Press and hold the key (on the other remote control transmitter) which has the function you want to store. 4SPORTTVS 1 AZZ CLUB 5STADIUM TEST 9CHURCH 2 6DISCO ON/OEFFFFECT 3 PHONO V-AUX * When learning is finished, the TRANSMIT/LEARN indicator stops lighting and then begins flashing slowly. * If a signal is not successfully received, the TRANSMIT/LEARN indicator flashes rapidly and the mode prior to step 4 is restored. If this occurs, restart from step 4. * If memory capacity is full, the TRANSMIT/LEARN indicator flashes rapidly to show you that learning is impossible, and then the mode before you began learning operations is restored. 6 Repeat step 3-5 to store more functions. 7 When you finish the learning operation, press the LEARN button. CLEAR LEARN MACRO 4 Press the key on this remote control transmitter in which you will store a new function. Lights up. HALL EVEL 7 ROCK +10 4SPORTTVS 1 8JAZZ CLUB TEST 5STADIUM 9CHURCH 2 6DISCO ON/OEFFFFECT 3 PHONO V-AUX UME * If a key which cannot learn another function is pressed, the TRANSMIT/LEARN indicator flashes rapidly and the current mode is canceled. If this occurs, repeat this step. * If there is no operation for about 30 seconds after a key is pressed, the TRANSMIT/LEARN indicator flashes rapidly and the mode before you began learning operations is restored. If this occurs, restart from step 2. Notes q Newly learned functions will replace previously learned functions. q If there is no more room in the memory area for a function to be learned, the TRANSMIT/LEARN indicator will flash rapidly. In this case, even if some keys are not occupied with functions from other remote control transmitters, no further learning is possible. q If the lid is closed while learning and about 5 seconds pass, the TRANSMIT/LEARN indicator flashes rapidly and the mode before you began learning operations is restored. If this occurs, restart from step 2. However, if the lid is opened within 5 seconds, the mode before the lid was closed is restored. q There may occasionally be instances in which, due to the signal-coding and modulation employed by the other remote control transmitter, this remote control transmitter will not be able to "learn" its signals. 39