Yamaha RDX-E700 Owner's Manual - Page 11
Preparation, Connecting Speakers - optical out
View all Yamaha RDX-E700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
CONNECTING SPEAKERS CONNECTING SPEAKERS Follow the procedure below to connect speakers to the DVD receiver. Here, the connection example uses the YAMAHA NX-E700 (consisting of two speakers) and its supplied cables. For information on your speakers, refer to the owner's manual for the speakers. y You can also use commercially available speakers (see page 8). Notes • Do not connect the power cable of the DVD receiver until all cable connections are completed. • Be sure to connect the left channel (L), right channel (R), "+" (red) and "-" (black) properly. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. • Do not let the bare speaker wires touch each other or do not let them touch any metal part of this unit. This could damage the DVD receiver and/or the speakers. • Use speakers with the specified impedance shown on the rear panel of this unit. • Use magnetically shielded speakers. If this type of speakers still creates the interference with the monitor, place the speakers away from the monitor. R speaker L speaker PREPARATION Speaker cable R L 6Ω MIN. /SPEAKER CLASS 2 WIRING SPEAKERS SUB WOOFER OUT Speaker cable DVD receiver AM ANT GND DIGITAL OPTICAL OUT Y PB PR VIDEO COMPONENT VIDEO OUT OUT IN AUX FM ANT 75Ω UNBAL. TUNER L R IN TV (U.S.A. and Canada models) 7 English