Yamaha REV500 REV500 Owners Manual - Page 22

Appendix Guide to Utility Mode Functions The following table briefly describes the functions that can be accessed using the UTILITY key. Each function is listed in order of appearance. The number to the right of the function's descrption indicates the page of this manual where you will find instructions on use of the function. Utitlity Mode Functions Function INT. PARAMETER Type Program edit TITLE EDIT Program edit INPUT SELECT System setting OUTPUT MODE System setting FOOT SWITCH System setting MIDI CHANNEL System setting (MIDI) MIDI THRU System setting (MIDI) MIDI PGM TABLE System setting (MIDI) MIDI BULK DUMP MIDI utility DEMO TONE TRIG System setting INI TITLE 1/2 System setting INI TITLE 2/2 System setting Description Used to edit the internal parameters of the currently selected program. Allows editing of the title of the currently selected program. Sets the REV500 to use either mono or stereo input Switches between efffect output only and effect output plus direct source output Selects the REV500 function that can be controlled by a connected footswitch Sets the MIDI channel that the REV500 will use to receive and send MIDI data Sets whether the MIDI OUT terminal will act as a MIDI OUT or merged MIDI THRU Assigns REV500 programs to MIDI Program Change numbers Transmits REV500 program or system setting data to another MIDI device Sets the tone and trigger mode for the REV500's audition function. Allows editing of the first line of the initial title message displayed at startup Allows editing of the second line of the initial title message displayed at startup Page 9 9 14 14 14 16 16 16 17 15 15 15 18