Yamaha RX-360 Owner's Manual - Page 15

SPECIFICATIONS AUDIO SECTION Minimum RMS Output Power per Channel 8 ohms, 50 Hz to 20 kHz, 0.04% THD [U.S.A. and Canada models] ......45W+45W [Australia, U.K., Europe and General .......... models 40W+40W 6 ohms, 50 Hz to 20 kHz, 0.06% THD [U.S.A. and Canada models].......48W+48W [Australia, U.K., Europe and General models 45W+45W Dynamic Power per Channel (by IHF Dynamic Headroom measuring method) [U.S.A., Canada and General models] 8/6/4/2 ohms 69/78/90/98W [Australia, Europe and U.K. models] 8/6/4/2 ohms 68/75/85/95W DIN Standard Output Power per Channel 4 ohms, 1 kHz, 0.7% THD [Europe model only 55W IEC Power 8 ohms, 1 kHz, 0.04% THD [Europe model only 50W Power Band Width 8 ohms, 20W, 0.1% THD ......10 Hz to 40 kHz Damping Factor 8 ohms, 1 kHz 50 Input Sensitivity/Impedance PHONO MM 2.5 mV/47 k-ohms CD/TAPE/AUX 150 mV/50 k-ohms Maximum Input Signal (1 kHz, 0.01% THD) PHONO MM 80 mV Output Level/Impedance REC OUT 150 mV/550 ohms Headphone Jack Rated Output/Impedance 8 ohms, 1 kHz, 0.04% THD Output Level 0.4V Impedance 330 ohms Frequency Response (20 Hz to 20 kHz) CD/TAPE/AUX 0±0.5 dB RIAA Equalization Deviation PHONO MM 0±0.5 dB Total Harmonic Distortion (20 Hz to 20 kHz) PHONO MM to REC OUT (3V 0.01% CD/TAPE/AUX to SP OUT (20W/8 ohms 0.02% Signal-to-Noise Ratio (IHF-A Network) PHONO MM (5 mV Input Shorted)........82 dB CD/TAPE/AUX (Input Shorted 103 dB Residual Noise (IHF-A Network 140 µV Channel Separation (Vol. -30 dB) PHONO MM (Input Shorted 1 kHz) .......55 dB CD/TAPE/AUX (Input 5.1 k-ohms Terminated 1 kHz)....55 dB Tone Control Characteristics BASS: Boost/cut 10 dB (50 Hz) TREBLE: Boost/cut 10 dB (20 kHz) Continuous Loudness Control 20 dB (1 kHz) (Level related equalization) FM SECTION Tuning Range [U.S.A. and Canada models 87.5 to 107.9 MHz [Australia, Europe, U.K. and General models 87.5 to 108.0 MHz 50 dB Quieting Sensitivity (IHF, 75 ohms) [Except Europe model] Mono 1.55 µV (15.1 dBf) Stereo 21 µV (37.7 dBf) Usable Sensitivity (75 ohms) (30 dB S/N Quieting, 1 kHz, 100% mod.) [Except Europe model 0.8 µV (9.3 dBf) DIN, Mono (S/N 26 dB) [Europe model 0.9 µV DIN, Stereo (S/N 46 dB) [Europe model 24 µV Image Response Ratio [Except Europe model 45 dB [Europe model 80 dB IF Response Ratio 80 dB Spurious Response Ratio 70 dB AM Suppression Ratio 55 dB Capture Ratio 1.5 dB Alternate Channel Selectivity [Except Europe model 85 dB Selectivity (two signals, 40 kHz Dev.) [Europe model 70 dB Signal-to-Noise Ratio (IHF) Mono/Stereo [Except Europe model 81 dB/76 dB (DIN-Weighted, 40 kHz Dev.) Mono/Stereo [Europe model 75 dB/70 dB Harmonic Distortion Mono/Stereo (1 kHz) [Except Europe model 0.1/0.2% Stereo (40 kHz Dev.) [Europe model 0.2% Stereo Separation (1 kHz 50 dB Frequency Response 30 Hz to 13 kHz 0 ±0.5 dB 20 Hz to 15 kHz 0 ±1.5 dB AM SECTION Tuning Range [U.S.A., Canada and General models 530 to 1,710 kHz [Australia, U.K. and Europe models 531 to 1,611 kHz Usable Sensitivity 100 µV/m Selectivity 32 dB Signal-to-Noise Ratio 50 dB Image Response Ratio 40 dB Spurious Response Ratio 50 dB Harmonic Distortion 0.3% AUDIO SECTION Output Level/Impedance FM (100% mod., 1 kHz) [Except Europe model 500 mV/3.2 k-ohms [Europe model (40 kHz Dev 400 mV/3.2 k-ohms AM (30% mod., 400 Hz) [Except Europe model 150 mV/3.2 k-ohms [Europe model 150 mV/3.2 k-ohms GENERAL Power Supply [U.S.A. and Canada models AC 120V, 60 Hz [Australia and U.K. models AC 240V, 50 Hz [Europe model AC 230V, 50 Hz [General model AC 110/120/220/240V, 50/60 Hz Power Consumption [Canada model 250 VA, 200W [U.S.A., Australia, U.K. and General models 160W [Europe model 120W AC Outlets 2 SWITCHED OUTLETS [Canada and Europe models 100W max. total [U.S.A. and General models 200W max. total 1 SWITCHED OUTLET [Australia and U.K. models 100W max. total Dimensions (W x H x D 435 x 131 x 292 mm (17-1/8" x 5-3/16" x 11-1/2") Weight 5.6 kg (12 lbs. 5 oz.) Accessories AM loop antenna Indoor FM antenna Remote control transmitter Batteries Specifications are subject to change without notice. 15