Yamaha RX-360 Owner's Manual - Page 7
Operations, To Play A Source - display
View all Yamaha RX-360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
OPERATIONS 3 2 4 TO PLAY A SOURCE 1 VOLUME ∞ 0 - dB ∞ Set to the " " position. 2 POWER 3 Select a desired input source. TAPE MONITOR AUX INPUT TUNER CD PHONO 1,6 7 5 Play the source. (For detailed information on the tuning operations, refer to the page 10.) 6 VOLUME ∞ 0 - dB Adjust to the desired output level. 7 If desired, adjust the BASS, TREBLE, BALANCE and LOUDNESS controls, etc. (Refer to page 9.) Note If both TAPE MONITOR and another input selector is selected, TAPE MONITOR has priority over another. * The name of the selected input source will appear in the display. * Note that pressing on each input selector selects the source which is connected to the corresponding input terminals on the rear panel. 4 Select the speakers to be used. SPEAKERS A B ON ON OFF OFF * If you use two speaker systems, press both the A and B switches. 7