Yamaha RX-460 Owner's Manual - Page 7
Operations, To Play A Source - display
View all Yamaha RX-460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
OPERATIONS 3 2 4 TO PLAY A SOURCE 1 VOLUME 0 - dB ∞ Set to the " " position. 2 POWER 3 Select a desired input source. MONITOR TAPE 2 TAPE 1 COPY AUX INPUT TUNER CD PHONO * The name of the selected input source will appear in the display. * Note that pressing on each input selector selects the source which is connected to the corresponding input terminals on the rear panel. 4 Select the speakers to be used. SPEAKERS A B ON ON OFF OFF * If you use two speaker systems, press both the A and B switches. 1,6 7 5 Play the source. (For detailed information on the tuning operations, refer to the page 10.) 6 VOLUME 0 - dB Adjust to the desired output level. 7 If desired, adjust the BASS, TREBLE, BALANCE and LOUDNESS controls, etc. (Refer to page 9.) Note In the step 3, if two or more program sources are selected at the same time (by using input selectors), be sure to remember the priority order of the input sources. Priority order of sources: 1) TAPE 1, 2) TAPE 2, 3) AUX, TUNER, CD or PHONO. q If you select AUX, TUNER, CD or PHONO, be sure that TAPE 1 and/or TAPE 2 are not being selected. q If you select TAPE 1 and TAPE 2 at the same time, the result will be the sound from the tape deck 1. q If you select both AUX and TAPE 1 at the same time, the result will be the sound from the tape deck 1. 7