Yamaha RX-460 Owner's Manual - Page 8

1,4 2 TO RECORD A SOURCE TO TAPE 1 Select the source to be recorded. MONITOR TAPE 2 TAPE 1 COPY AUX INPUT TUNER CD PHONO .* To dub from tape to tape, refer to the "Notes" shown at right. * When selecting AUX, TUNER, CD or PHONO, be sure that TAPE 1 and/or TAPE 2 are not also selected. 2 Play the source and then turn the VOLUME control up to confirm the input source. (For detailed information on the tuning operations, refer to the page 10.) 3 Set the tape deck in the recording mode. 4 To monitor the audio signals being recorded, press the input selector button for the tape deck being used to make the recording. TAPE 2 MONITOR TAPE 1 COPY AUX INPUT TUNER CD PHONO Notes q VOLUME, BASS, TREBLE, BALANCE and LOUDNESS control settings have no effect on the material being recorded. q To dub from tape to tape, only the following one way of dubbing can be performed. SOURCE RECORDER Tape deck connected to the TAPE 2 terminals. → Tape deck connected to the TAPE 1 terminals. 8