Yamaha RX-A3070 RX-A3070/RX-A2070 Owners Manual - Page 146
Level, Parametric EQ, Test Tone
View all Yamaha RX-A3070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
■ Level Adjusts the volume of each speaker. Choices Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front Presence L, Front Presence R, Rear Presence L, Rear Presence R, Subwoofer 1, Subwoofer 2 Setting range -10.0 dB to 0.0 dB to +10.0 dB (0.5 dB increments) ■ Parametric EQ Adjusts the tone with an equalizer. Settings Manual Select this option when you want to adjust the equalizer manually. For details, see "Manual equalizer adjustment". YPAO:Flat Adjusts individual speakers to achieve the same characteristics. YPAO:Front Adjusts individual speakers to achieve the same characteristics as the front speakers. YPAO:Natural Adjusts all speakers to achieve a natural sound. Through Does not use the equalizer. X "YPAO:Flat", "YPAO:Front", and "YPAO:Natural" are available only when the measurement results of "Auto Setup" have already been saved (p.54). Press ENTER again to view the measurement results. ■ Manual equalizer adjustment 1 Set "Parametric EQ" to "Manual" and press ENTER. 2 Press ENTER again to enter the edit screen. 3 Use the cursor keys to select a speaker and press ENTER. X • To restore the default settings for all speakers, select "PEQ Data Clear" and then "OK". • To copy the parametric equalizer values acquired with "Auto Setup" (p.54) to the "Manual" fields for fine adjustment, select "PEQ Data Copy" and then an equalizer type. 4 Use the cursor keys (e/r) to select a center frequency from the 7 preset bands (4 for subwoofer) and the cursor keys (q/w) to adjust the gain. Setting range Gain: -20.0 dB to +6.0 dB 5 To fine-adjust the center frequency or Q factor (bandwidth), press ENTER repeatedly to select an item. Frequency: Use the cursor keys (e/r) to adjust the center frequency of the selected band and the cursor keys (q/w) to adjust the gain. Q: Use the cursor keys (e/r) to adjust the Q factor (bandwidth) of the selected band and the cursor keys (q/w) to adjust the gain. Setting range Center frequency: 15.6 Hz to 16.0 kHz (15.6 Hz to 250.0 Hz for subwoofer) Q factor: 0.500 to 10.080 6 To exit from the menu, press ON SCREEN. ■ Test Tone Enables/disables the test tone output. Test tone output helps you to adjust the speaker balance or equalizer while confirming its effect. Settings Off Does not output test tones. Outputs test tones automatically when you adjust the speaker balance or On equalizer. En 146