Yamaha RX-A680 RX-A680 Owner s Manual - Page 123
TROUBLESHOOTING, When any problem appears, If trouble occurs, first check the following:, Power
View all Yamaha RX-A680 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
TROUBLESHOOTING When any problem appears If trouble occurs, first check the following: Make sure of the following when the unit does not function properly. • The power cables of the unit, TV and playback devices (such as BD/DVD players) are connected to AC wall outlets securely. • The unit, subwoofer, TV and playback devices (such as BD/DVD players) are turned on. • The connectors of each cable are securely inserted in to jacks on each device. If there is no problem with the power and cables, refer to the instructions shown in "When any problem appears" corresponding to the trouble of the unit. If the problem you are experiencing is not listed or if the instructions do not help, turn off the unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. Power, system, or remote control trouble n The power does not turn on l The protection circuitry has been activated three times consecutively. If the standby indicator on the unit blinks when you try to turn on the power, as a safety precaution, capability to turn on the power is disabled. Contact your nearest Yamaha dealer or service center to request repair. n The power does not turn on in synchronization with the TV l HDMI Control on the unit is disabled. If turning off the unit is not synchronized to the TV either, check the setting of HDMI Control on the unit. For details on HDMI Control, see the following: - "Setting the use of HDMI Control" (p.100) l HDMI Control on the TV is disabled. If only turning on the unit is not synchronized to the TV, check the setting on the TV. For details, refer to the instruction manual for the TV and set HDMI Control on the TV. l Because of a power failure, the unit's power is no longer synchronized. Disconnect the HDMI cables and power cables, and after five minutes, reconnect the cables of playback devices first, then the unit, and then the TV. Then, check that the power is synchronized. n The power does not turn off l The internal microcomputer has frozen, due to an external electric shock (such as lightning or excessive static electricity) or to a drop in the power supply voltage. Hold down z (power) on the front panel for more than 15 seconds to reboot the unit. If the problem persists, disconnect the power cable from the AC wall outlet and plug it again. 123 En