Yamaha RX-A680 RX-A680 Owner s Manual - Page 31
Preparing for connecting to a network, Connecting a network cable (wired connection)
View all Yamaha RX-A680 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
5 Preparing for connecting to a network Preparing for connecting to a network The unit supports wired and wireless connections. Select a connection method according to your network environment. If you are using a router that supports DHCP in the wired connection, you do not need to configure any network settings for the unit. NOTE You need to configure the network settings if your router does not support DHCP or if you want to configure the network parameters manually. For details, see the following: ▪ "Setting the network parameters manually" (p.112) To connect the unit to a wireless network, select one of the following methods to configure the wireless network settings. l Method using the MusicCast setting When adding the unit to the MusicCast network, you can also configure the unit's wireless network settings at once. If you use MusicCast CONTROLLER, we recommend the wireless connection to MusicCast network. For details, see the following: - "Adding the unit to the MusicCast network" (p.39) l Other methods For details, see the following: - "Selecting a wireless network connection method" (p.141) Connecting a network cable (wired connection) Connect the unit to your router with a commercially-available STP network cable (CAT-5 or higher straight cable). You can enjoy Internet radio or music files stored on media servers, such as PCs and Network Attached Storage (NAS), on the unit. Internet Modem Network Attached Storage (NAS) WAN PC LAN Wireless router Network cable )%.* )%$1 )%.*065 )%$1 "3$ #%%7% /&5803, /&5 "6%*0 57 015*$""6%* $0"9*"- "7 7*%&0 "7 7*%&0 "7 7*%&0 '. Њ "/5&//" 3"%*0 ". .0/*503065 $0"9*"- "6%* 13&065 46#800'&3 NOTE 41&",&34 '30/5 $&/5&3 The 463306/% unit (rear) 4*/(-& ▪ If you are using a router that supports DHCP, you do not need to configure any network settings for the unit, as the network parameters (such as the IP address) will be assigned automatically to it. You only need to configure the network settings if your router does not support DHCP or if you want to configure the network parameters manually. For details, see the following: - "Setting the network parameters manually" (p.112) ▪ You can check whether the network parameters (such as IP address) are properly assigned to the unit. For details, see the following: - "Checking the network information of the unit" (p.111) 31 En