Yamaha RX-E100 Owner's Manual - Page 26

ADD KX-E100 AND/OR MDX-E100 TO YOUR SYSTEM Before recording When you record by using MDX-E100 or KX-E100, you must first make the connections as shown in "Connecting the system" on page 5. For details, refer to the instructions supplied with the MDX-E100 or KX-E100. A source from the component which is connected to the AUX terminal component can be recorded on a tape or MD. 2 • Only the first track is recorded. After recording the CD tray opens automatically. 3 Dubbing setting There are six different combinations of components. Once you choose a certain mode, recording starts and ends automatically in a certain way for each mode. MD REC TAPE REC TAPE 4 • Same as CD (Tr1) = TAPE 5 Play unit Record unit DUBBING MODE MODE DUBBING START DUBBING START • Same as CD = TAPE 1 Decide the combination of the components. Each time you press DUBBING MODE, the mode will change in the below order. 1 • Recording automatically starts from the beginning of the tape. (By pressing DUBBING START, the tape automatically rewinds to the beginning if it is in the middle.) • When the recording on side A finishes while a track is being played back, the recording on side B starts from the beginning of the same track. • The sound is automatically faded out when it gets close to the end of side B. 6 Play unit Record unit • Recording automatically starts at the beginning of the tape. (By pressing DUBBING START, the tape automatically rewinds to the beginning if it is in the middle.) 2 Press DUBBING START to start recording. Note • The displays 1~6 which include the component you have not connected to your receiver (RX-E100) will be skipped. E-24