Yamaha RX-S600D RX-S600/RX-S600D Owners Manual - Page 29
Connecting to a network
View all Yamaha RX-S600D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
1 2 3 4 5 6 7 8 9 10 6 Connecting to a network Connect the unit to your router with a commercially-available STP network cable (CAT-5 or higher straight cable). You can enjoy Internet radio or music files stored on media servers, such as PCs and Network Attached Storage (NAS), on the unit. Internet Network Attached Storage (NAS) WAN PC LAN Modem • Some security software installed on your PC or the firewall settings of network devices (such as a router) may block the access of the unit to the network devices or the Internet. In these cases, configure the security software or firewall settings appropriately. • Each server must be connected to the same subnet as the unit. • To use the service via the Internet, broadband connection is strongly recommended. Router Network cable HDMI ARC OUT (BD/DVD) HDMI 1 HDMI 2 HDMI 3 HDMI 4 HDMI 5 MHL 5V 1A NETWORK (NET) OPTICAL CONPONENT Y PB VIDEO AV 1 AV 2 COAXIAL AV 3 COAXIAL VIDEO AUDIO 1 (TV) AV 4 PR VIDEO AV 5 ANTENNA (RADIO) AM FM AUDIO 2 AUDIO OUT SUBWOOFER PRE OUT 75 COMPONENT VIDEO DC OUT 5V 0.5A VIDEO MONITOR OUT Y PB PR FRONT SPEAKERS CENTER EXTRA SURROUND /BI-A The unit (rear) • If you are using a router that supports DHCP, you do not need to configure any network settings for the unit, as the network parameters (such as the IP address) will be assigned automatically to it. You only need to configure the network settings if your router does not support DHCP or if you want to configure the network parameters manually (p.90). • You can check whether the network parameters (such as IP address) are properly assigned to the unit in "Information" (p.90) in the "Setup" menu. PREPARATIONS ➤ Connecting to a network En 29