Yamaha RX-V430 Owner's Manual - Page 46
B MAIN main speaker mode, 1C REAR LR rear speaker mode, 1D BASS LFE/bass out mode
View all Yamaha RX-V430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
SET MENU I 1B MAIN (main speaker mode) Choices: LARGE, SMALL LARGE Select this if you have large main speakers. The entire range of the main left and right channel signal is directed to the main left and right speakers. SMALL Select this if you have small main speakers. The lowfrequency signals (90 Hz and below) of the main channel are directed to the speakers selected with "1D BASS". I 1C REAR LR (rear speaker mode) Choices: LRG (large), SML (small), NON (none) LRG Select this if you have large rear left and right speakers or if a rear subwoofer is connected to the rear speakers. The entire range of the rear channel signal is directed to the rear left and right speakers. SML Select this if you have small rear left and right speakers. The low-frequency signals (90 Hz and below) of the rear channel are directed to the speakers selected with "1D BASS". NON Select this if you do not have rear speakers. y • This unit is set in the virtual CINEMA DSP mode when you select NON for "1C REAR LR". I 1D BASS (LFE/bass out mode) LFE signals carry low-frequency effects when this unit decodes a Dolby Digital or DTS signal. Low-frequency signals are defined as 90 Hz and below. The Lowfrequency signals can be directed to both main left and right speakers, and the subwoofer (subwoofer can be used for both stereo reproduction and the DSP program). Choices: SWFR (subwoofer), MAIN, BOTH SWFR Select this if you use a subwoofer. The LFE signals are directed to the subwoofer. MAIN Select this if you do not use a subwoofer. The LFE signals are directed to the main speakers. BOTH The LFE signals are directed to the subwoofer. Lowfrequency signals designated to the main channels in accordance with other speaker mode settings are directed to both main speakers and a subwoofer. Note • When you select MAIN for "1D BASS", the low-frequency signals (90 Hz and below) of the main channel are directed to the main speakers even if you select SMALL for the main speaker mode. I 1E MAIN Lv (main level mode) Change this setting if you cannot match the output level of the center, and rear (L/R) speakers with the main speakers because of unusually high-efficiency performance from the main speakers. Choices: Nrm (Normal), -10 dB Nrm Select this if you can match the output level of your effect speakers with that of your main speakers when using the test tone. -10 dB Select this if you cannot match the output level of your effect speakers with that of your main speakers when using the test tone. 42