Yamaha RX-V440 MCXSP10 Manual - Page 61

SPECIFICATIONS AUDIO SECTION • Minimum RMS Output Power for Main, Center, Rear, Rear Center RX-V540 [U.S.A. and Canada models] 20 Hz to 20 kHz, 0.06% THD, 8 80 W 1 kHz, 0.7% THD, 8 95 W RX-V540 [Other models] 20 Hz to 20 kHz, 0.06% THD, 8 70 W 1 kHz, 0.7% THD, 8 85 W RX-V440 [U.S.A. and Canada models] 20 Hz to 20 kHz, 0.06% THD, 8 75 W 1 kHz, 0.7% THD, 8 90 W RX-V440 [Other models] 20 Hz to 20 kHz, 0.06% THD, 8 65 W 1 kHz, 0.7% THD, 8 80 W • DIN Standard Output Power [Europe model] 1 kHz, 0.7% THD, 4 Ω RX-V540 115 W RX-V440 110 W • Maximum Power (EIAJ) [China, Korea and General models] 1 kHz, 10% THD, 8 Ω RX-V540 100 W RX-V440 95 W • Dynamic Power (IHF) 8/6/4/2 Ω RX-V540 [U.S.A. and Canada models] ...... 100/125/160/200 W [Other models 90/110/145/180 W RX-V440 [U.S.A. and Canada models] ........ 95/120/150/190 W [Other models 85/105/140/170 W • Damping Factor 20 Hz to 20 kHz, 8 100 or more • Frequency Response CD to Main L/R 10 Hz to 100 kHz, -3 dB • Total Harmonic Distortion 20 Hz to 20 kHz, 40 W, 8 Ω, Main L/R 0.06% • Signal to Noise Ratio (IHF-A Network) CD (250 mV, shorted) to Main L/R, Effect Off 100 dB • Residual Noise (IHF-A Network) Main L/R 150 µV or less • Channel Separation (1 kHz/10 kHz) CD (5.1 kΩ terminated) to Main L/R 60 dB/45 dB • Tone Control (Main L/R) BASS Boost/Cut 10 dB/60 Hz TREBLE Boost/Cut 10 dB/20 kHz • Phones Output 150 mV/100 Ω • Input Sensitivity CD, etc 150 mV/47 kΩ 6CH INPUT 150 mV/47 kΩ • Output Level OUT (REC 150 mV/1.2 kΩ OUTPUT SUBWOOFER 4 V/1.2 kΩ VIDEO SECTION • Video Signal Type NTSC or PAL • Signal to Noise Ratio 50 dB • Frequency Response (MONITOR OUT) Composite, S-Video RX-V540 5 Hz to 10 MHz, -3 dB Component DC to 30 MHz, -3 dB FM SECTION • Tuning Range [U.S.A. and Canada models 87.5 to 107.9 MHz [Other models 87.50 to 108.00 MHz • 50 dB Quieting Sensitivity (IHF, 100% mod.) Mono/Stereo 2.0 µV (17.3 dBf) /25 µV (39.2 dBf) • Usable sensitivity (IHF, Mono 1.0 µV (11.2 dBf) • Signal to Noise Ratio (IHF) Mono/Stereo 76 dB/70 dB • Harmonic Distortion (1 kHz) Mono/Stereo 0.2%/0.3% • Stereo Separation (1 kHz 42 dB • Frequency Response 20 Hz to 15 kHz +0.5, -2 dB AM SECTION • Tuning Range 530/531 to 1710/1611 kHz • Usable Sensitivity 300 µV/m GENERAL • Power Supply [U.S.A. and Canada models AC 120 V/60 Hz [Australia model AC 240 V/50 Hz [U.K., Europe and Singapore models AC 230 V/50 Hz [Korea model AC 220 V/60 Hz [China and General models] ..... AC 110/120/220/240 V, 50/60 Hz • Power Consumption [U.S.A. and Canada models 270 W/360 VA [Other models 270 W Standby Mode approx. 0.8 W • AC Outlets [U.S.A., Canada, Europe and Singapore models 2 (Total 100 W maximum) [China and General models 2 (Total 50 W maximum) [U.K. and Australia models 1 (100 W maximum) • Dimension (W x H x D 435 x 161 x 390 mm (17-1/8" x 6-3/8" x 15-3/8") • Weight 11.0 kg (24 lbs 4 oz) *Specifications are subject to change without notice. ADDITIONAL INFORMATION English 57