Yamaha RX-V567 Quick Reference Guide - Page 6
Set up the speaker parameters automatically YPAO - test
UPC - 027108935980
View all Yamaha RX-V567 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
5 Set up the speaker parameters automatically (YPAO) When connection is finished, adjust the status, sizes, and volume balance of the speakers to provide an optimal sound field. This unit is equipped with a YPAO (Yamaha Parametric Room Acoustic Optimizer) function that adjusts the speaker balance automatically with a simple procedure. When you use YPAO, a test tone will be output from the speakers for approximately 3 minutes and acoustic measuring will be performed. When using YPAO, be careful of the following. • The test tone is output at high volume. Please refrain from using this function at night when it may be a nuisance to others nearby. • Please take care that the test tone does not frighten any small children. When operating the YPAO, information is displayed both on the TV screen (On-Screen Display) and on the front panel. This explanation will use operations while viewing the display on the TV screen. 1 Check the following before using YPAO. This unit • The headphones are removed. VOLUME CROSSOVER/ HIGH CUT TV • This unit is connected to the TV correctly. • The power is turned on. • The video input to which the video output from this unit has been selected. Subwoofer • The power is turned on. • Volume is set to approximately half, and the cross-over frequency (if present) is set to maximum. MIN MAX MIN MAX Subwoofer examples 2 Place the supplied YPAO microphone at ear height in your listening position. YPAO microphone When positioning the microphone, we recommend that you use equipment that allows you to adjust the height (such as a tripod) as a microphone stand. When using a tripod, use the tripod screws to fix the microphone in place. 3 Press RECEIVER A on the remote control to switch this unit on. 4 Connect the YPAO microphone to the YPAO MIC jack on the front panel. YPAO MIC INFO "MIC ON. View OSD MENU" appears on the front panel display, and then appears the following display on the TV screen. bbAutobSetup bbbbEQbType;;;;Natural bb.bStart YPAO microphone bbb[OPTION]:EQbSelect bbbb[SETUP]:Start Continues to the next page - 6 -