Yamaha RX-V870 Owner's Manual - Page 15

OPERATIONS Illustrations: RX-V1070 Parts in shaded areas ( ) are not present on RX-V870. PHONES jack 2 4 To play a source 7 3, 3, 5 Tuner controls TONE BYPASS BASS EXTENSION 1, 6, 3 1 7 1 7 If desired, adjust the BASS, TREBLE, BALANCE controls, etc. (refer to page 16) and use the digital sound field processor. (Refer to page 19.) ∞ Set to the " " position. POWER 2 To record a source to tape (or dub from a tape to another) 1 Select the source to be recorded. 3 Select the desired input source with the input selector switches. (For video sources, turn the TV/monitor ON.) * The indicator corresponding to the selected input source will illuminate. 4 Select the front speakers to be used. SPEAKERS * If you use two front speaker systems, press both the A and B switches. 5 Play the source. (For detailed information on the tuning operation, refer to the page 17.) 6 Adjust to the desired output level. * "AUX" is not present on RX-V870. 2 Play the source. 3 Confirm the source by selecting it with the input selector switch and turning up the VOLUME control. 4 Set the tape deck or VCR to the recording mode. 5 If your tape deck has three head monitoring capability, you can monitor the signal just recorded by selecting the tape deck in the recording mode with the input selector switch. * Also, refer to the manual of the tape deck being used. Notes • If you want to enjoy another source while recording, select it with the input selector switch. • Adjusting the VOLUME, BASS, TREBLE, BALANCE controls, BASS EXTENSION and TONE BYPASS switch and operating the digital sound field processor during recording have no effect on the material being recorded. 15