Yamaha Rio1608-D Rio3224-D/Rio1608-D Owners Manual [English] - Page 19
Specifications
View all Yamaha Rio1608-D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Specifications Specifications General Specifications Sampling Frequency Signal Delay Frequency Response Total Harmonic Distortion*1 Hum&Noise*2 Dynamic Range Crosstalk@1kHz Dimensions (WxHxD) and Net Weight Power Requirements (wattage) Power Requirements (voltage and hertz) Temperature Range Included Accessories Internal 44.1kHz 48kHz 88.2kHz 96kHz 44.1kHz +4.1667%, +0.1%, -0.1%, -4.0% ±200ppm External 48kHz +4.1667%, +0.1%, -0.1%, -4.0% 88.2kHz +4.1667%, +0.1%, -0.1%, -4.0% ±200ppm ±200ppm 96kHz +4.1667%, +0.1%, -0.1%, -4.0% ±200ppm Less than 3ms INPUT to OUTPUT, connect with CL5 using Dante, Dante Receive Latency set to 0.25ms (one way), Fs=48kHz +0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs= 44.1kHz, 48kHz +0.5, -1.5dB 20Hz-40kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs= 88.2kHz, 96kHz Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, Fs= 44.1kHz, 48kHz Less than 0.05% 20Hz-40kHz@+4dBu into 600Ω, Fs= 88.2kHz, 96kHz INPUT to OUTPUT, Input Gain= Min. -128dBu typ., Equivalent Input Noise, Input Gain= Max. -88dBu Residual output noise, ST master off. 112dB typ., DA Converter, 108dB typ., INPUT to OUTPUT, Input Gain= Min. -100dB*3, adjacent INPUT/OUTPUT channels, Input Gain= Min. Rio3224-D: 480mm x 232mm*4 x 361.5mm, 12.4kg Rio1608-D: 480mm x 144mm*4 x 361.5mm, 8.8kg Rio3224-D: 120W Rio1608-D: 70W US/Canada: 120V 60Hz Japan: 100V 50/60Hz China: 110-240V 50/60Hz Korea: 220V 60Hz Other: 110-240V 50/60Hz Operating temperature range: 0 - 40°C Storage temperature range: -20 - 60°C Owner's Manual, Power Cord, Dante Virtual Soundcard Token leaflet *1. Total Harmonic Distortion is measured with 18dB/octave filter @80kHz *2. Hum & Noise are measured with A-Weight filter. *3. Crosstalk is measured with a 30dB/octave filter @22kHz *4. Including rubber feet. Owner's Manual 19